The product is a solvent-based two-component adhesive that needs to be used with hardener PA-9001. It mainly bond with various membrane materials, membrane and aluminum materials and has high peel strength and boiling resistance.
1. Basic data

Item	SA850（Adhesive）	PA-9001（Hardener）
Solid  content(%)	50±2	100%
Solvent	Ethyl acetate	None
Rotational viscosity（25℃ mpa.s）	50-200	1750-3250
Mix ratio	100	6.5

2.Application precess
1. Dilution: it is recommended to mix the hardener and the solvent evenly before add the addhesive. Stirring time should not be less than 5 minutes.
2. Dry coating weight：Suggested coating dry weight 5-5.5g/m2
3.  Drying temperature：Suggested drying temperature 80-100℃，according to the drying situation；
4. Compound temperature：Suggested compound temperature 40-60℃；
5. Curing condition：Suggested curing temperature 50-60℃，curing time 2-3 days。
 
Notice
1. Avoid moisture and keep dry；
2. It is recommended to use up the ingredients within 2-4 hoursafter stirring.
3. The diluent can be ethyl acetate or butanone with moisture content of no more than 0.2%; ethanol and other alcohol solvents with active hydrogen cannot be used;